Anti Barking Ultrasonic Dog Repeller for Outdoor Use Effective Bark Stop Trainer Device

The following situations have poor results in driving dogs: 1. A dog raised by oneself, because it knows its owner will not harm it. 2. Environments with high noise levels, such as bustling urban areas or roadside areas. 3. A dog with its owner - a dog wielding power. Trained large dogs - well-trained. 2. When the battery voltage is too low - low transmission power. The above situation will not affect the effectiveness of this product, because our own dogs, dogs that often go shopping, dogs that are with their owners, and well-trained dogs will not bite people indiscriminately. Attention: It is best not to intentionally tease dogs with a dog repellent device, as it is not surprising for dogs to listen too much. When the dog drive light is dim and bright, it is necessary to charge it in a timely manner Feature: 1. Ultrasonic anti-barking device can automatically detect dog barking from 50 feet away. The bark control device automatically emits high-pitched sounds that only dogs can hear. After the dog stops barking, the ultrasonic bark control will automatically stop emitting ultrasonic waves. 2. Ultrasound is harmless to pets and completely inaudible to human ears, so the device can be used safely 3. Can be hung on trees, indoor, outdoor walls or fences to prevent dogs from barking (in range). When excessive barking is detected, the microphone will respond to the barking and activate the component. 4. There are 4 frequencies for ultrasonic waves to choose from. For different types of pets or animals, ultrasonic waves are more effective to stimulate. The frequency of 15/20KHz is most commonly used for dogs to stop barking 5. The sensing distance can be selected, the sensitivity can be adjusted, and the best suitable gear can be set according to the use environment. 6. The product shell is anti-ultraviolet, and the shell is not easy to fade. 7. The ultrasonic power is increased, the coverage is wider, and the ultrasonic stimulation is strong. 8. IP45 waterproof level. Specification: Material: ABS Colour: Black Battery capacity: 1500mAh Working Distance: 50ft/15m Color: Black How to use it: Charging the collar :To charge the device,Plug the black USB charging cable that is supplied into the bottom of the device and connect it to either a Laptop, PC or power supply that is≤2 amp. The device can be charged in three hours and will work continuously for 30 days. When charging the device,the digital display will show the power level and continue to flash until it is fully charged the product is fully charged,the digital display will show a"4". Before turning on the device unplug the USB charger. Turning the device ON-OFF To turn device ON press the"POWER" button down for 3 seconds and it will beep once with the digital display flashing a green number which will then disappear. To Turn device OFF press the"POWER"button down for 3 seconds and it will beep twice and turn itself off. Settings: The digital display shows the levels ofsensitivity and Frequency. You can choose to adjust the sensitivityfrom 1-4 by constantly press the Sensitivitybutton. Level 1 is the least sensitive and level 4is the most sensitive. You can choose to adjust the ultrasonic Frequencyfrom 1-4 by constantly press the Frequencybutton.